info@swisspadelonfire.ch
Steffisburgstrasse 17, 3604 Thun

26 structural steel columns made of 100x50x2 mm tubing and 4 double columns of 100x50x2 mm for the corners with a galvanized base plate of 200x200x10 mm with four holes for expansion bolts 10x14x110 mm. Corner diagonals made of bent steel sheet in the same color as the structure. 8 frames measuring 3000×2000 mm with electro-welded mesh of 50x50x4 mm with double profile reinforcement of 40x20 mm in the mesh at 1 m and 2 m to prevent deformations. 4 frames measuring 3000×2000 mm with an opening for double access to the court made of electro-welded mesh of 50x50x4 mm with double profile reinforcement of 40x20 mm in the mesh at 1 m and 2 m to avoid deformations. Double-sided access without doors. 14 frames measuring 2000×1000 mm with electro-welded mesh of 50x50x4 mm on the glass upper part. Galvanized steel structure, coated with thermally cured epoxy-polyester, baked at 200 °C, to achieve a durable coating resistant to salt residues, sand, and sunlight (corrosion protection). COLOR according to the customer's choice. Complete installation set. Playing net made of black polypropylene with a mesh size of 43x43 mm, 3.5 mm thick, with UV protection, tension rope made of galvanized steel, 3.5 mm thick, with plastic coating, wide upper band made of textile tape, attached to a post with a tensioning device. The entire steel structure forms a single plane, including the glass covering, which helps avoid player injuries and prevents unpredictable ball rebounds. The entire structure of the steel shell complies with current regulations approved by the Spanish Padel Federation (Federación Española de Padel).

Delivery of eighteen (18) clear SECURIT glass panes measuring 2995×1995 mm, 10 mm thick, with flat, polished edges and recessed holes for fastening, protected by 5 mm thick neoprene foam seals at the junction with the frames, standardized stainless steel screws that have undergone a reinforcing heat treatment. Colorless.

Bonding joints without solvents using two-component epoxy adhesive on a geotextile membrane. Topdressing with rounded, washed, dried, and dusted quartz sand with a controlled granulation of 0.03-0.08 in a quantity of 15 kg per m2 (3,000 kg).

Delivery of 4 additional posts up to 6 meters high with cross beams for the installation of lights. A general power supply on the ground is required.
Padel Courts

Artificial turf

SPORTFIB
Moderate use

This fibrillated turf consists of evenly cut homogeneous fibers with quartz sand infill to facilitate maintenance and improve durability. It is a fast turf with consistent bounce, though it does not last as long as some other options.

TECHNICAL DATA
SPORTMONO
Intensive Nutzung

Monofilament turf consists of a 3-rib fiber that withstands abrasion better than others and therefore lasts longer. However, it is slightly slower than Sportfib and must be brushed regularly to maintain consistent bounce.

TECHNICAL DATA
SPORTTEXT
Intensive use

This is the surface used on professional padel courts. It has textured monofilament fibers for a more stable, compact surface, promoting play across the entire court with consistent bounce. It is faster than Sportmono and requires much less sand.

TECHNICAL DATA
Padel Courts

More color options

Padel Courts

Lighting

Image Product
STANDARD LIGHTING

Standard lighting with straight poles equipped with capacity for one or two spotlights each.

OWN PRO LIGHTING

Patented design, lighting with an innovative, distinctive design developed and registered by J'hayber Padel. The pole angle prevents reflections and impacts with x3 breakage protection.

Image Product
CUSTOM LIGHTING

We can design and manufacture lighting that meets your specific needs and preferences. Our engineers tailor the design in collaboration with the client in our factory.